ADSS Suspension clamp
ADSS cable suspension clamp is used to connect all dielectric self supporting cables to straight line towers.Dynamic stress of wind vibration can be suppressed by the product to improve optical vibration resistance.The product may also ensure that the bending of cable dees not exceed the allowable value,so as to prevent the optical fiber from generating attachment loss.
The Preformed Suspension Clamp is the connecting hardware of ADSS cable which hanging in transmission line pole (tower). It can reduce static stress at the support point, improve cable ant-vibration ability, and cushioned against the dynamic stress of Aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don’t produce extra loss in the cables.
Structure and Material:
Thimble—Hot dip galvanized steel. Thimble is designed to bear gravity and to hang on the pole.
Armor Rods—– Galvanized steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Short Span Tangential Suspension Clamp for ADSS Cable
Recommended Span Length: ≤50m
One set of short span suspension clamp include one thimble and on helical.It also can be ordered without thimble.
| Item | Cable diameter | φ (mm) |
L (mm) |
Color |
| CR-50-10.6/11.6 | 10.6-11.6 | 48 | 500 | Blue |
| CR-50-11.7/12.8 | 11.7-12.8 | Green | ||
| CR-50-12.9/14.1 | 12.9-14.1 | Red | ||
| CR-50-14.2/15.6 | 14.2-15.6 | Yellow | ||
| CR-50-15.7/17.3 | 15.7-17.3 | Black | ||
| CR-50-17.4/19.1 | 17.4-19.1 | Orange |
Related Prodcut
