Products

Compression tap connector H-Tap Compression Connector

Short Description:

Description The H-type compression tap connector is a compressed structure, made of pure aluminum or aluminum alloy, and cannot be disassemble...


  • facebook
  • linkedin
  • twitter

Product Detail

Description

The H-type compression tap connector is a compressed structure, made of pure aluminum or aluminum alloy, and cannot be disassembled after installation. The H-Tap Compression Connector is named because its cross-section resembles the letter H. With the help of special hydraulic clamps, the wire clamp and the two wires to be connected can be pressed into a whole. After crimping, the contact part is elliptical and cylindrical, and the shape is relatively compact. Similar to the wedge-shaped parallel groove clamp, its compression process is controlled by the output pressure of the hydraulic clamp, and the human influence is small. H-type compression tap connector can connect two wires of equal diameter and different diameter. The span of wires in the same slot is generally 3-4 specifications. When the H-shaped parallel groove clamp is connected to the wire, due to the ring force, the aluminum on the inner wall of the clamp is plastically deformed, and it is embedded in the twisted gap of the outer layer of the wire, and the effective contact surface is large. The H-shaped parallel groove clamp pairs the wire The grip strength is about 40%-65% of the calculated breaking force of the wire.

The performance of H-type compression tap connector
1.Low resistance, energy saving, safe and reliable operation.
2.Use special installation tools to ensure the quality of installation.
3.Wires of various materials can be connected for free.
4.Used with cover of H-type compression tap connector,has insulation protection.

fwqfas
wqfas
awqdsad

Models

CRH-11

CRH-21

CRH-22

CRH-31

CRH-32

CRH-41

Outer Dimater

Run "A" (mm) :

4.8-8.2

8.3-14.0

10.0-14.0

13.0-22.4

13.0-22.4

16.2-22.4

Run "B" (mm) :

4.8-8.2

4.8-9.6

10.0-14.0

4.8-11.4

11.6-16.0

16.2-22.4

Conductor size

Run "A" (mm2):

16-35

50-95

50-95

95-240

95-240

150-240

Run "B" (mm2):

16-35

16-50

50-95

16-70

70-150

150-240

Insulate  sleeve 's Models

Plastic Type:

JH-1

JH-2

JH-2

JH-2

JH-2

JH-3

Rubber Type:

LHZ-1

LHZ-2

LHZ-2

LHZ-2

LHZ-2

LHZ-3


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories

    Main Products

    Cable lug

    Stainless steel banding accessories

    Fiber optical ADSS Accessories

    Splicing fitting

    Preformed fitting