Junction Box Waterproof enclosure SHQ series
Junction box is suitable for indoor and outdoor electric,communication,fire fighting apparatus,iron and steel smelting,petrochemical industry,electron,power
system,railway,building,mine,air and sea port,hotel,ship,works,waste water treatment equipment,environmental equipment and so on. Combined body and cover
are fixed with four plastic screws that are difficult to fall off. Its specification and size can be designed based on the customer requirements.Economic and
affordable.Only have1/4 weight of iron box ,to facilitate handling and operation, no corrosion, easy insulation.Combined body and cover are fixed with four plastic
screws that are difficult to fall off. Its specification and size can be designed based on the customer requirements.Economic and affordable. Only have1/4 weight of
iron box ,tofacilitate handling and operation, no corrosion, easy insulation.Waterproof junction box purpose: electrical,electronics, communication, fire fighting
equipment,control panel,terminal box, large factory, coastal plant, environmental hazard facility, etc.Water junction box purpose:
electrical,electronics,communication,fire fighting equipment,control panel,terminal box,large factory,coastal plant,environmental hazard facility etc.
Plastic junction box may form part of an electrical conduit or thermoplastic-sheathed cable (TPS) wiring system in a building. If designed for surface mounting,
it is used mostly in ceilings, under floors or concealed behind an access panel—particularly in domestic or commercial buildings. An appropriate type
(such as that shown in the gallery) may be buried in the plaster of a wall (although full concealment is no longer allowed by modern codes and standards)
or cast into concrete with only the cover visible.It sometimes includes built-in terminals for the joining of wires.
Body: ABS or PC,can be selected according to the customer’s requirements.
White or black
Protection Level: IP66
Working Temperature: -40°C~80°CCustomized: Accept
Waterproof, Dustproof, corrosion resistance, shock resistance, long life using
1.Inside:There are the installation holes in the base for circuit board or din rail.
2.Outside:The products can be directly fixed on the wall or other flat boardswith screws or nails via the screw holes in the base.The plastic plate in the hole can be
knocked off and installing cable gland to get better waterproof performance.
|L (mm)||W (mm)||H (mm)|