Products

Suspension Clamps with Neoprene Insert for ADSS cables

Short Description:

Suspension clamps with neoprene insert for ADSS cables Description The suspension clamp for round ADSS cable for all dielectric self supporting A...


  • facebook
  • linkedin
  • twitter

Product Detail

Suspension clamps with neoprene insert for ADSS cables

Description

The suspension clamp for round ADSS cable for all dielectric self supporting ADSS cable used for aerial round optical fiber cable.These optical fiber cable accessories can be installed on short spans at intermediate poles.ADSS suspension clamp are very easy in installation of optical fibr line and appropriate mechanical resistance.The ADSS cable suspension clamp can be archived by tightening nut until needed strength will be reach.Or self adjusting under cable weight.Neoprene insert or strap does not allow the optical cable to slip from the suspension fitting.The ADSS cable may be different sizes,but fiber optical cable route should be straight with angles up to 25 degree

Suspension clamps are designed to provide a suspension for 5 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100m).

HC Suspension clamp1

Product Code Cable size(mm) Strength (kN) Matreials
HC5-8 5-8 4 Galvanized stell,UV resistant plastic
HC8-12 8-12 4
HC10-15 10-15 4
HC15-20 15-20 4

6.1

Models: PS615ADSS(*) PS1520ADSS(*) PS2227ADSS(*)
Max spans(m): 150 150 150
Cable diameter(mm): 6~15 15 ~ 20 22 ~ 27
Min tensile (daN): 300 300 300
L (mm): 120 120 120
Remarks:      

Related Product
Suspension Clamp

Feature

1.Two sizes to cover the full range of ADSS cables from 5 to 20mm.

2.The shape of the J Hook allows a running out of  the cable directly in the hook.

3.The suspension clamps can be directly secured to the poles using bolts or bandings.

4.Hook clamps also can be installed on hook bolts to provide some flexible suspension point and give extra protection to the cable against wind induced vibrations.

How to install the J hook suspension clamp?

Step 1: Fix the J hook suspension clamp to the pole by stainless steel banding or horse clamp.

Step 2: Insert the cable to the hole of the J hook suspension clamp body.

Step 3: Tighten the nut so that the main body of the rubber part firmly locks the cable

Is it easy and quick?

The J hook suspension clamp for ADSS optical fiber cable has two types,HC series and PS series.The appearance of the two types is same.

the different between the two types is the strength and cable size.the strength of PS type is bigger than the HC series.

The PS series cable size is wide than HC series.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Main Products

    Cable lug

    Stainless steel banding accessories

    Fiber optical ADSS Accessories

    Splicing fitting

    Preformed fitting