The material of the C Wedge Connectors is generally forged aluminum, which is composed of two parts: a bow-shaped body and a wedge; gun-shaped special tools are used for installation or disassembly, but cannot be reused. The slope of the two sides of the wedge is the same as the slope of the body, so that the wire can be uniformly stressed in the contacted section and self-locking between materials can be established; the bow-shaped body provides the elastic force required to maintain a stable pressure. The radius of curvature of the inner groove of the arcuate body and the radius of the outer groove of the wedge are slightly larger than the radius of the largest applicable wire. During installation, put the two connected straight wires into the corresponding positions on both sides of the main body, push the wedge to the mark line position by manpower, and then fire the special gun-shaped tool to generate an instant thrust to press the wedge into Work bit. The pressure on the wedge is mainly determined by the amount of charge in the special bullet, which reduces the influence of human factors on the installation quality, so the installation consistency of the Wedge Connectors is better. The C Wedge Connectors can connect two wires of equal diameter and different diameter. The gripping force of the wedge-shaped parallel groove clamp on the wire is about 20%-45% of the calculated breaking force of the wire.
The performance of H-type compression tap connector
1.Low resistance, energy saving, safe and reliable operation.
2.Use special installation tools to ensure the quality of installation.
3.Wires of various materials can be connected for free.
4.Used with cover of C-type Wedge Connectors,has insulation protection.